Features that convince:

• Brand new high-tech design that consistently follows the function. Compact and convenient, intuitive and logical to use.
• TTL metering system integrated into camera body. Only this design guarantees full functionality with all interchangeable viewfinders and lens attachments.
• Three metering modes: center-weighted multi-zone and multi-zone average and spot metering.
• Choice between shutter priority AE, aperture priority AE, programmed AE and metered manual.
• Modern TTL flash metering off the film or sensor plane based on the SCA 3002 interface.
• Rugged camera body made from a special aluminum alloy.

PQS lenses with carbon leaf shutter blades providing a top shutter speed of 1/1000 second.

• Electronically controlled shutter with full flash synchronization from 1/1000 s to 30 s.
• Direct drive linear motors with high-performance neodymium magnets providing precise control of aperture and shutter speed in 1/3 increments.
• All PQ-/PQS lenses of the Rolleiflex 6008 system made since 1988 can be used without an adapter.

Rapid analog shooting

• Film magazine with built in motor drive for single frames and continuous shooting with 1.5 frames per second.
• Automatic monitoring and, if necessary, correction of exposure during continuous shooting.
• Added value of motor drive even in single frame shooting. There is nothing to disturb the photographer’s concentration, no change in position or framing. The camera always rests steady in his hands.

More extras

• Mirror lock-up, indispensable for long exposures and both macro as well as digital photography.
• Display of key shooting data both in the viewfinder and on the handgrip display.
• Interchangeable viewfinder systems and focusing screens.
• Practical control grip for easy handling of camera in any shooting situation.
• Cutting-edge lenses from Carl Zeiss and Schneider-Kreuznach.
• Intelligent TTL flash technology in conjunction with SCA-3002 adapter.

Hardware innovations 2012

• Change in hand grip click stop positions for improved handling.
• Reinforcement of the hand grip adapter to ensure maximum safety for the camera housing in the event of drop or impact.
• Revision of the tripod plate for improved protection of the autofocus module from damage.li>
• Redesign of the mirror transmission, for even less vibrations and quieter operation.

2012 new firmware

• The number of lenses for the AF offset (sharpness optimization) has been greatly extended.
• The possibility of individual storage of the AF-offsets for the listed lenses.
• Battery capacity monitoring via an icon in the camera viewfinder display or as a percentage value in the hand grip display.
• Improved fault management.